This Photo-electric Optical Smoke Alarm uses the light scatter principle (which detects smoke particles entering the optical chamber of the alarm) to respond rapidly to a domestic fire.
It has an Easi-Fit base that enables a quick installation and easy maintenance. The alam is wired with a replaceable 9V alkaline battery which may last for up to 4 years in standby mode or 2 years if unpowered from the mains.
It has a high performance optical chamber with integral fixed insect screen to avoid false alarms. It also has a prominent Test/Hush button.
This unit can connect with up to twelve alarms, where if any alarm is triggered, all alarms shall be activated.
This product has a 5 year (limited) warranty.
| Sensor: | Optical, uses light scatter from smoke particles. (Note: Sensing chamber meets the 25mm stand-off installation requirements of AS1670.1 and AS1670.6) |
| Ambient Light: | Chamber housing and compensation overcomes possible problems due to stray light |
| Sensitivity: | Complies with AS 3786 (Nominal 10%Obs/m) |
| Source: | Contains NO radioactive material |
| Airspeed: | Essentially immune to the effect of airspeed |
| Test Facility: | Simulates the effect of smoke and checks electronics and horn |
| Automatic Self-Test: | Smoke chamber is tested every 40 seconds and unit beeps (without LED flash) if the sensor is de-graded |
| Insect Screen: | 1mm diameter stainless steel mesh mitigates insect and debris entry into the smoke chamber |
| Hush Facility: | In “Hush” mode the alarm enters a ten minute period of reduced sensitivity to overcome false alarm conditions, and will then automatically reset itself |
| Primary Supply: | 230 Volts AC |
| Power-On Indicator: | Continuous Green LED |
| Secondary Supply: | 9 Volt Alkaline Battery |
| Low Battery Warning: | Beeps every 40 second when the stand-by battery reaches it depletion threshold |
| Alarm Sounder: | Integral electronic piezo horn |
| Alarm Sounder Connection: | Piezo contacts are soldered to prevent failure due to contact corrosion over time |
| Alarm Sounder Output: | 85dB (minimum) at 3m |
| Alarm Status Indicator: | Red LED flashes every second on device sensing fire. |
| Temperature Range: | 0 to 40°C |
| Humidity Range: | 15% to 95% Relative Humidity |
| Interconnection: | Up to 12 140 series smoke or heat alarms, along with one EIB128 relay base, may be interconnected. (but NOT to other manufacturer’s devices) |
| Fixing: | Easi-Fit mounting base |
| Enclosure Material: | UL94VO flame retardant |
| Dimensions: | 152mm diameter x 50mm depth |
| Weight: | 345 grams |
| Warranty: | 5 year (limited) warranty |
| Approvals: | Certified to AS3786 ActivFire afp 1578 |
